Accessories

Custom Size Bridge (CB)
(SB1, SB2, SB2T)

Modifying the length of bridge supplied with the chair by extending or shortening to suit the particular room configuration (if necessary).
Click Here to see a custom bridge instructional video

 

Neck Rest Assembly (NRA)
(SB1, SB2)

Includes:
1 x Neck Rest (Part 70)
1 x Neck Rest Height Adjustment Tube (Part 71)
1 x Neck Rest Attachment (Part 72)
2 x Neck Rest Sleeve (Part 73)
Note: To add this accessory 2 x 6.5mm holes need to be drilled through the backrest frame (part 40) to allow fixing of part 72.
Alternatively order a new backrest frame with pre?drilled holes (part 40a).


Shower Base Risers (SBR)
(SB1)

Includes:
4 x Shower Base Risers
4 x Suction Cups (Part 49)
This accessory will be required where the shower base is level or below the bathroom floor. Image on Left is standard SBR (comes with chair) and on Right is the longer SBR for level or lower shower bases. Order longer units as SBR

Tub Base Extension 24 (TBE24)
(SB2, SB2T)

Includes:
Pair of height adjustment tubes.
This accessory item may be required where the bath tub base is lower than the floor of the bathroom.
These height adjustment tubes are longer than standard height adjustment tubes that come with the tub base and allow greater adjustment when there is a lower bath tub base relative to the bathroom floor.

 

Rolling Base Extension 24 (RBE24)
(SB2, SB2T)

Includes:
Pair of height adjustment tubes.
This accessory item may be required where the bath tub base is higher than the floor of the bathroom.
These height adjustment tubes are longer than standard height adjustment tubes that come with the rolling chair base and allow greater adjustment when there is a higher bath tub base relative to the bathroom floor.

Cushion Overlay (SCO)
(SB1, SB2, SB2T, SB3T)

To close the commode function and use the chair as a transport
chair if required

Body Positioning Belt (BPB)
(SB1, SB2, SB2T, SB3T)

A softer fabric positioning belt.

Tensioned Backrest (TBR)
(SB1, SB2, SB2T, SB3T)

The tensioned backrest has 3 separate adjustment points to suit most users’ posture and comfort. The fabric is a fast drying comfortable mesh fabric.

Lateral (SBD-SS100-SH1C1)
(SB1, SB2, SB2T, SB3T)

Laterals are constructed of soft PU foam pads on stainless steel / aluminum adjustable base units. Requires a tensioned back to allow openings for fixing locations.

Pediatric Seat Adaptor  (PSA)
(SB1, SB2, SB2T, SB3T)

This reclining Pediatric seat can be fitted to the Showerbuddy chair seat plate. Adjustable tilt on back rest and leg rest, comes with restraints and neck laterals.

  
Some bathrooms may require that the bridge section, which connects the rolling chair to the shower base or bath base, be either shortened or lengthened. This occurs infrequently but is available when required. Your Dealer will be able to assist with this.
?